Skip to content
English
Contact Tech Support
  • There are no suggestions because the search field is empty.

How do I reconnect my Wi-Fi camera after making a change? 

Reconnect your Wi-Fi Camera using AP (Access Point) Mode

To reconnect a video device to a Wi-Fi network using Access Point (AP) Mode:

Connect a Wi-Fi capable device to the video device's access point (temporarily wifi network)

  1. Press and hold the WPS/Reset button on the back of the video device for 5 to 7 seconds until the LED starts flashing white.

  2. Using a computer, smartphone, or tablet, connect to the Wi-Fi network name that starts with either ALARM or the device name, followed by (XX:XX:XX). The numbers in parentheses are the last six digits of the video device’s MAC address.

    Example: The network name for an ADC-V723/723X could read ALARM (XX:XX:XX) or ADC-V723/723X (XX:XX:XX).

Configure the video device's Wi-Fi network using the AP mode user interface

  1. Using a web browser on the Wi-Fi capable device, enter 192.168.1.1 in the web browser and press Enter.
  2. Follow the on-screen instructions to connect the video device to the customer's wireless network.
  3. Click Scan for wireless networks.
  4. Click the name of the customer's Wi-Fi network.
  5. In the Security Key field, enter the customer's Wi-Fi password.
  6. Click Ok in the pop-up window that appears asking to refer to the website.

Wait for the video device to connect

  • Wait for the LED to turn solid green, and then try to view live video on our website or your mobile app. If the video device's LED does not turn solid green, reboot the video device retry this procedure.